| |
High Density Downstroke Baler - Compactor
DP-24 Specifications |
| |
 |
|
| |
 |
|
|
Click here to view drawing of our NEW high density downstoke baler with side mounted power unit |
GENERAL EQUIPMENT SPECIFICATIONS |
| Dimensions |
Depth 27" Width 35" Height 98" (top of cylinder) |
| Compaction force (normal) |
25,200lbs |
| Compaction force (max) |
30,150lbs |
| Ram face dimension |
24"W x 17"D |
| Ram face pressure (normal) |
58 psi |
| Ram face pressure (max) |
74psi |
| Cycle time (unloaded) |
27 sec |
| Unit weight |
1175 lbs |
| Baler meets or exceeds ANSI Z245.5 safety standards. |
| Baler uses readily available, nationally and internationally distributed components. |
| Baler is assembled from at least 95% American made components. |
|
BALE SPECIFICATIONS |
| Bale size |
18"D x 20"H x 24"W |
| Bale weights |
80 to 100 lbs - OCC
80 lbs - P.E.T
85 lbs - HDPE
75 lbs - ALUMINUM
100 lbs - PAPER |
|
HYDRAULIC SYSTEM SPECIFICATION |
Motor (hp)
(rpm)
(voltage) |
3
3450
208/230/480 VAC 60Hz Three phase (220 volt single phase is optional) |
| Pump (type) |
Hi-Lo positive displacement gear pump. |
System pressure (normal)
(max) |
2000 psi
2400 psi |
| System design pressure |
2500 psi |
Cylinder (bore)
(stroke)
(rod) |
4"
34"
2 1/2" |
|
|
|
The system is completely self-contained within the baler. The power unit has the following features: 20 micron filtering system, soft shift
directional valve, and oil heater port. |
PAINT SPECIFICATIONS |
| Primer |
Rust inhibiting bottom coat, 2 mil thickness |
| Paint |
Industrial enamel, high solids, 4 mil thickness |
 For
further compactor, baler, and drum crusher information, please call or fax us at the numbers
below.
|
|
FREE Quotes! Click here
|
|
Testimonials... click here
