| Specs |
| Overall Depth | 38" |
| Overall Width | 71" |
| Overall Height | 142" (top of cylinder) |
| Feed Door Opening | 22"H x 60"W |
| Compaction Force, Normal | 63,617 lbs. |
| Compaction Force, Maximum | 70.686 lbs. |
| Ram Face Dimension | 60"W x 30"D |
| Ram Face Pressure, Normal | 35.3 psi |
| Ram Face Pressure, Maximum | 39.3 psi |
| Cycle Time | 60 seconds |
| Bale Size | 30"D x 48"H x 60"L |
| Bale Volume | 50 cubic feet |
| Bale Weights (approx.), Corrugated | 850 - 1100 lbs. |
| Ram Penetration | 20" |
| Floor | 3/16" steel plate
6" channel
1/2" x 5" flat bar re-enforcement |
| Sides | 1/4" steel plate
(two) 3/8" x 4" side stiffeners per side |
| Back | 6" channel |
| Door | 3/16" plate
4" x 2" x 1/4" tubing
4" x 4" x 1/4" top tube |
| Cylinder Mounting | 10" channel
1" steel plate |
| Presshead | 3/8" steel plate
6" channel
6" I beam
(guides) 2 1/2" x 2 1/2" x 3/8" angle, 36" long |
| Hydraulic Pump | rotary vane positive displacement |
| Hydraulic Pump Capacity | 9 gpm |
| Hydraulic System Pressure, Normal | 2250 psi |
| Hydraulic System Pressure, Maximum | 2500 psi |
| Hydraulic System Design Pressure | 2500 psi |
| Hydraulic Cylinder Bore | 6" |
| Hydraulic Cylinder Stroke | 44" |
| Hydraulic Cylinder Rod | 3.5" |
| Hydraulic Reservoir Capacity | 22 gal. |
| Motor 208/230/480 VAC 60hz 3 phase | 10hp 1750 rpm |
Testimonials... click here
